Please remove the rubber end cap on the end of legs by using a wood stick or similar object to gently prise between the rubber cap / aluminum ring and push forward and around the ring to remove the rubber cap.

Screw in the spike and use the 12mm open wrench to lock the spike to the bottom of the tripod leg.

There are 3 M4/M5 screws on the tripod main frame to fasten the center part accessory. By loosen up 3 M4/M5 screws with our included hexagonal wrench, user can interchange ballhead mount, center column, or leveling base. Once the center part accessory has been interchanged, please fasten the 3 M4/M5 screws to lock the accessory tightly in place.

First, you must secure the centre column tightly on the tripod, then with one hand holding center column, and the other hand holding ballhead, screw the ball head clockwise onto the screw on the mount.

To insert the quick release plate: First, loosen the Quick release knob (3). Then press the safety button (1) to insert the quick release plate on the ball head plate base. Make sure the plate is securely locked by safety lock (2) in position by rocking the plate back and forth on the plate base. Then tighten the Quick release knob (3).

To release the quick release plate: First, loosen the Quick release knob (3). Then press the safety button (2) to release the quick release plate.